Figure 8 isn't intended to supply technical specifications for erecting scaffolding as it isn't doable to indicate all details. Be aware that a hoarding hooked up to scaffolding might create giant wind hundreds that may trigger the scaffolding to collapse. This reduces the danger of unintended contact that might trigger an electric shock. Always get advice from a competent electrical worker earlier than work starts near a low voltage overhead electric line. For example, if consent has been obtained from the property proprietor permitting work between 0.5 and four m from a low voltage overhead electric line, further management measures will minimise the chance of electrical shock. With written consent from the property owner, low voltage power line workers should maintain a MAD of at the very least 0.5 m from the overhead line. A PCBU engaged on a site with different businesses must consult, cooperate and coordinate actions with those companies. If a person will probably be working near a low voltage overhead electric line, the PCBU should find out how shut the particular person will need to work.
Where makes an attempt have been made but have failed to resolve a work well being and safety challenge, a person concerned in the difficulty (for example, the PCBU, a worker’s representative, or a worker) can request that we appoint an inspector to help with the decision of the difficulty. ‘Reasonably practicable’ means doing what's cheap in the circumstances to make sure well being and security. See Appendix 1 of this information for the complete HSWA definition of ‘reasonably practicable’. Appendix 2 of this guide outlines what we expect a PCBU to verify when a site is first arrange, as well as what needs to be checked each day, regularly, and as wanted. Appendix 1 of this information has an inventory of the technical phrases, phrases abbreviations used in this guide and explains what they imply. They are not meant to provide technical specs. We recommend that MADs are used together with one or more other control measures.
In addition to maintaining a MAD, we anticipate a combination of control measures to be put in place to minimise the danger of electric shock. As well as sustaining a MAD, we anticipate further management measures for use to minimise the risk of electric shock. For instance, the control measures that will probably be used to remove or minimise the chance of electric shock. A PCBU ought to use the hierarchy of controls (Figure 3) to work out the most effective management measures to minimise the risk. If the electricity supply will not be remoted, the danger of electric shock must be minimised by using control measures to handle the risk. For instance, a painter, scaffolder and roofer engaged on the identical site should collectively handle the risks of working near a low voltage overhead electric line. If work must be accomplished close to a live low voltage overhead electric line, the safest possibility is to remove the chance of electric shock by having the electricity supply to the property remoted earlier than work begins. Work can only happen nearer to the road if written consent has been obtained from the property proprietor. If work needs to take place close to a low voltage overhead electric line and isolating the electricity provide shouldn't be reasonably practicable, then the worker’s physique, their instruments and their tools should be stored a safe distance away from the overhead line.
If cellular plant is probably going for use near a low voltage overhead electric line, the owner or operator of the plant must fix an authorised warning notice in an apparent place as near as practicable to the operator’s place. Touching a live low voltage overhead electric line with any a part of the body, a instrument or tools could cause death or severe harm. There are also particular MADs for non permanent structures (equivalent to scaffolding) and cellular plant in use close to an overhead line. As well as the insulation choices described in Section 5 of this guide, using non-conductive scaffolding or insulated elevating work platforms can assist to minimise threat. Section 2: to be completed by a reliable electrical worker with a current practising licence. The property proprietor should ask the electrical worker to confirm that they've a present New Zealand practising licence and the related experience to supply recommendation about work near a low voltage overhead electric line. Any work done near a live low voltage overhead electric line carries a danger of electric shock. The property owner owns the electrical belongings inside the property boundary, together with the low voltage overhead electric line. ‘Isolate’ means to disconnect a property’s electricity supply from the electricity distribution strains in order that the low voltage overhead electric line to the property is now not dwell.
Working Near Low Voltage Overhead Electric Lines
by Tayla Fereday (2025-01-31)
Where makes an attempt have been made but have failed to resolve a work well being and safety challenge, a person concerned in the difficulty (for example, the PCBU, a worker’s representative, or a worker) can request that we appoint an inspector to help with the decision of the difficulty. ‘Reasonably practicable’ means doing what's cheap in the circumstances to make sure well being and security. See Appendix 1 of this information for the complete HSWA definition of ‘reasonably practicable’. Appendix 2 of this guide outlines what we expect a PCBU to verify when a site is first arrange, as well as what needs to be checked each day, regularly, and as wanted. Appendix 1 of this information has an inventory of the technical phrases, phrases abbreviations used in this guide and explains what they imply. They are not meant to provide technical specs. We recommend that MADs are used together with one or more other control measures.
In addition to maintaining a MAD, we anticipate a combination of control measures to be put in place to minimise the danger of electric shock. As well as sustaining a MAD, we anticipate further management measures for use to minimise the risk of electric shock. For instance, the control measures that will probably be used to remove or minimise the chance of electric shock. A PCBU ought to use the hierarchy of controls (Figure 3) to work out the most effective management measures to minimise the risk. If the electricity supply will not be remoted, the danger of electric shock must be minimised by using control measures to handle the risk. For instance, a painter, scaffolder and roofer engaged on the identical site should collectively handle the risks of working near a low voltage overhead electric line. If work must be accomplished close to a live low voltage overhead electric line, the safest possibility is to remove the chance of electric shock by having the electricity supply to the property remoted earlier than work begins. Work can only happen nearer to the road if written consent has been obtained from the property proprietor. If work needs to take place close to a low voltage overhead electric line and isolating the electricity provide shouldn't be reasonably practicable, then the worker’s physique, their instruments and their tools should be stored a safe distance away from the overhead line.
If cellular plant is probably going for use near a low voltage overhead electric line, the owner or operator of the plant must fix an authorised warning notice in an apparent place as near as practicable to the operator’s place. Touching a live low voltage overhead electric line with any a part of the body, a instrument or tools could cause death or severe harm. There are also particular MADs for non permanent structures (equivalent to scaffolding) and cellular plant in use close to an overhead line. As well as the insulation choices described in Section 5 of this guide, using non-conductive scaffolding or insulated elevating work platforms can assist to minimise threat. Section 2: to be completed by a reliable electrical worker with a current practising licence. The property proprietor should ask the electrical worker to confirm that they've a present New Zealand practising licence and the related experience to supply recommendation about work near a low voltage overhead electric line. Any work done near a live low voltage overhead electric line carries a danger of electric shock. The property owner owns the electrical belongings inside the property boundary, together with the low voltage overhead electric line. ‘Isolate’ means to disconnect a property’s electricity supply from the electricity distribution strains in order that the low voltage overhead electric line to the property is now not dwell.